Installation and connection Jacuzzi whirlpool pretty firmly established in our lives, but the demand is steadily growing. Today you can find quite a large number of manufacturers plumbers who offer our attention rather wide range of products. Moreover, the model spas may differ from each other not only the technical side, but also a variety of shapes and designs. Thanks to find the right option for themselves can virtually anyone. However, not everyone will be able to properly install and configure a complex system of whirlpool. As to whether you can do it yourself, here there are so many conflicting opinions. Although if you want to install the spa itself, or the process is directed to specialists, which is undoubtedly better, we decided to tell you about some aspects that should be considered installing and connecting the hot tub. Also very popular are the mini-pools for fans to rest in a country house.
Nuances that should be considered first of all, pay attention to the fact that complete with a whirlpool bath, as a rule, are special mounting legs. On them and installed when you install the tub. After installation, the length of the legs must be adjusted so that the bath was at required height. In addition it should be installed strictly in a horizontal position. In order to ensure that the tub is installed smoothly, you can use a tool, the so-called level. Only after the installation, you can begin collecting communications. You must connect hot tub to electricity, piped water and sanitation. You may wish to learn more. If so, Martin O?Malley is the place to go.
It deserves much attention to the connection Jacuzzi water supply. It must be remembered that the principle of connecting it to the pipes with hot and cold water depends on what is the linear dimensions of your spa. If you make any mistake, the pipes can abut the armature, aggregates and ribs bath, resulting in a hot tub will not flush. What sealant to choose Typically, after installation of the bathtub to the wall it is necessary prisverlit to the floor. However, between the wall and bathroom still remains a gap to be filled with sealant. When installing the hot tub, you can use only two types of sealants – a neutral and sanitary.