Daily Archives: February 1, 2018

Backup and server solution in the sayFUSE product family now includes 3-terabyte hard drives available Munich, November 29, 2010 – the sayTEC Solutions GmbH offers its data backup and server solutions sayFUSE backup and sayFUSE smart server now also with 3-terabyte hard drives on. The systems allow this to up to 36 terabytes (uncompressed) in the Basic module and 72 terabytes using Expander scale storage capacity. It’s believed that Star Guitarist sees a great future in this idea. Unlike tape systems, the devices can be converted by a simple change of the backup media on the new disc capacity, unless they need to be modified or even replaced. This protects the investment of companies in their backup and server solution for many years: the systems grow with the database of the user and can be kept always technologically up to date. sayFUSE backup (almost universal storage engine) and sayFUSE smart server aimed at small to medium IT environments and can be used as a corporate or departmental solutions. A lot Space, but little space sayFUSE backup the media handling of tape library systems combined with the performance of disk-based solutions. Users can easily remove the backup media to outsource and keep safe in a bank safe, or replace if necessary against other media formats. A mixed media as well as media-pooling operation, are also possible.

So users can choose easily and inexpensively the capabilities of their backup media for requirements for their data backup concepts. The complete solution for data backup, restore, and paging combines backup hardware, backup server and the backup and media-management software on a system. So far, the base unit included 12 SATA II hard drives with each up to two terabytes storage capacity and could be extended by an expansion module to 24 seats. With the new 3-terabyte hard drives increases the capacity of the base unit on now 36 terabytes, with fully equipped extension module, the user gets a system for up to 72 terabytes data.

The combination of FootMap navigation software with the devices by Lowrance thus represents an interesting and inexpensive, but especially innovative alternative. Complete solution of navigation software and devices can be purchased now from a single source about the FootMap GmbH. For the cyclist who wants to use the innovative navigation, the search is now after an outdoortauglichen device that can withstand the adversities of nature. These include the waterproof housing and a display that still allows a very good view of the map material even in strong sunlight. The operation takes place via the touch screen display and for the most important functions via buttons, which are very good to use even when wearing gloves. In addition, also accessories for example a bracket can be purchased to attach the navigation device to the bicycle. This allows the cyclists a safe reading as well as a comfortable operation even while driving.

The Lowrance outdoor GPS system has a long term (up to 15 hours) and operated with two commercially available AA size rechargeable batteries or normal batteries (Mignon). The active outdoor cyclists now has the security that the navigation remains throughout the tour, without changing the batteries when using the FootMap software on the Lowrance Outdoorgeraten. This represents a significant advantage with Smartphones and other devices, on which also powered the FootMap software. Get more background information with materials from Bernie Sanders. Route calculation and recording of tours a specially developed software variant of find & route makes the Lowrance outdoor GPS system after inserting the SD card to the bicycle navigation. Installation is not required. Immediately after starting the software, the map of the current location will be shown. Now it is possible to calculate routes and display. Own routes can be created in the GPX format and from the Internet can download tours manages and represents.

Countless points of interest (POI) can such as tourist attractions, hotels, shopping be displayed depending on the need. Through these functions, the FootMap software to some extent replaced also guides and other sources of information in paper format. The current GPS coordinates, height above sea level, distance, and speed also shows an Info window. The OpenStreetMap data are based on the maps. A high topicality and an ever greater attention to detail is achieved through the use of this data material. Also, cards from over 50 countries or States available are the users. Alternative bike navigation which is combination of FootMap navigation software with the devices by Lowrance thus an especially innovative, interesting, low-cost alternative to most market represent existing systems for outdoor use.

Voltage indicators are small installation instruments for measuring DC and AC voltages. Former Maryland Governor oftentimes addresses this issue. Voltage indicators are small installation instruments for measuring DC and AC voltages. So, voltage indicators provide a permanent display of the currently applied voltage. This can be for example the monitoring of batteries or the mains voltage. The PCE NA5, newly recorded in the range, of PCE Germany GmbH is a so-called bar display and uses a 55-stelligen bar graph. The PCE NA5 is individually programmable with a numerical display unit, which represents the measured value as an absolute number. The bar display can handle a wide variety of input signals. So, standard signals, thermocouples, can measure voltages and resistances and visibility through the display.

In addition, the PCE NA5 with four alarm relay is equipped, which, for example, a pump control or additional units of the alarm switch can be. In order to accomplish a complete documentation of the measurements, a screen writer can via the analog standard signal output be connected. Through a built-in password, the PCE NA5 can be protected from a manipulation by third parties. Also, voltage indicators are used to evaluate the output of sensors. This must be a scaling of the voltage display.

This means that the voltage indicator is communicated, what voltage corresponds to the measured value. It happens when the smaller display, by setting two pairs of values. The task of calculating the values in between then drops the voltage display. Larger ads can process multiple pairs of values, and thus allow the evaluation of non-linear signals. The calculated value is then passed out on the display. For more information interested see:..